Panasonic Tig Welding Robot - Tig welding robot with wire feeder – Yunhua

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Teaching Robot Yaskawa, Based Pick And Place Robot, Tig Welding Robot Arm, With outstanding company and top quality, and an enterprise of overseas trade featuring validity and competitiveness, which will be trustworthy and welcomed by its clientele and makes joy to its employees.
Panasonic Tig Welding Robot - Tig welding robot with wire feeder – Yunhua Detail:

2meter welding robot

DELIVERY AND SHIPMENT

Yunhua company can offer customers with different terms of delivery. Customers can choose shipping way by sea or by air according to urgency priority. Yooheart robot packaging cases can meet sea and air freight requirement. We’ll prepare all files like PL, the certificate of origin, invoice and other files. There are a worker whose main job is make sure every robot can be delivered to customers port without a hitch in 40 working days.

After sale service
Yunhua company can offer customers with different terms of delivery. Customers can choose shipping way by sea or by air according to urgency priority. Yooheart robot packaging cases can meet sea and air freight requirement. We’ll prepare all files like PL, the certificate of origin, invoice and other files. There are a worker whose main job is make sure every robot can be delivered to customers port without a hitch in 40 working days.

FQA
Q. How to set power source when using TIG welding?

Your welding machine should be set to DCEN (Direct current electrode negative) also known as straight polarity for any work piece that needs to be welded unless they material is either aluminum or magnesium. High frequency is set to start which is found built in nowadays in inverters. Post flow should be set at least 10 seconds minimum. If A/C is present it is set to default setting that coincides with DCEN. Set the contactor and amperage switches to remote settings. If the material that needs to be welded is aluminum polarity should be set to A/C, A/C balance should be set to about 7 and high frequency supply should be continuous.

Q. How to set shield Gas during TIG welding?

TIG welding uses the inert gas for shielding the welding area from contamination. Thus this inert gas is also stated as shielding gas. At all cases it should be argon and no other inert gas such as neon or xenon etc especially if TIG welding is to be performed. It should be set around 15 cfh. For welding aluminum alone you can make use of a 50/50 combination of argon and helium.

Q. How to choose TIG welding torch?

There are a lot of different kind of torch can be used. But according to the chilling method, you have air cooling TIG torch and water cooling TIG torch. And also, the Ampere will be different, some of them can bear 250AMP, while some of them can only bear 100AMP.

Q. when should I choose water cooling TIG torch and air cooling TIG torch?

You should choose water cooling TIG torch if there are a large quantity of pieces need to weld. But air cooling TIG torch will be a good choice if your pieces is very few.
If you have thick pieces to be weld, water cooling TIG torch is better than air cooling TIG torch.

Q. Is the tungsten electrode used for all applications?

No, for TIG welding it is understood that the electrodes you use to perform TIG welding should be made out of tungsten element. But it’s not means one tungsten electrode can be used for all applications. You should choose different tungsten electrode according to different material.


Product detail pictures:

Panasonic Tig Welding Robot - Tig welding robot with wire feeder – Yunhua detail pictures

Panasonic Tig Welding Robot - Tig welding robot with wire feeder – Yunhua detail pictures


Related Product Guide:

Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Panasonic Tig Welding Robot - Tig welding robot with wire feeder – Yunhua , The product will supply to all over the world, such as: Thailand, Yemen, India, More than 26 years, Professional companies from all over the world take us as their long-term and stable partners. We are keeping durable business relationship with more than 200 wholesalers in Japan, Korea, USA, UK, Germany, Canada, France, Italian, Poland, South Africa, Ghana, Nigeria etc.
  • Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Joa from Chile - 2018.02.08 16:45
    It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Albert from Costa rica - 2018.07.26 16:51
    Write your message here and send it to us